HD Fork & Grabs – for 3 – 4.5 tonne machines

Home / Products / Forks / HD Fork & Grabs – for 3 – 4.5 tonne machines

The Cherry CF07 range of fork and grabs are designed for machines with a capacity of 3 – 4.5 tonnes. With hydraulic cylinders taken from the tough 4 in 1 bucket, and 38mm Ø cylinder and pivot pins. The standard range starts at 7′ wide and can be built up to 8′, although one off builds are always welcomed. We also offer a wide range of tine combinations to suit your needs, such as KV style, Hardox or 50mm Ø round for the fork base and Hardox or KV style for grab. All of the Forks in our heavy duty grab range include grab stops for the protection of the hydraulic cylinders and pins.

To find out where your nearest Cherry Products Dealership is click here

Brackets Included / 1.76m Vertical Opening Height

Part No.CapacityWidthHeightDepthWeight KgTinesNo.RRP
CF07AK1.85m³ (65ft³)2.13m (7')1.30m (4'3")1.10m (3'6")450KV type9£5,400
CF07A1.85m³ (65ft³)2.13m (7')1.30m (4'3")1.10m (3'6")4602'' round9£5,730
CF07AHD1.85m³ (65ft³)2.13m (7')1.30m (4'3")1.20m (3'9")500Hardox8£6,070
CF07K1.98m³ (70ft³)2.28m (7'6")1.30m (4'3")1.10m (3'6")475KV type10£5,615
CF071.98m³ (70ft³)2.28m (7'6")1.30m (4'3")1.10m (3'6")4852'' round10£5,980
CF07HD1.98m³ (70ft³)2.28m (7'6")1.30m (4'3")1.20m (3'9")605Hardox9£6,355
CF07KW2.13m³ (75ft³)2.45m (8')1.30m (4'3")1.10m (3'6")595KV type11£5,835
CF07W2.13m³ (75ft³)2.45m (8')1.30m (4'3")1.10m (3'6")6052" round11£6,230
CF07HDW2.13m³ (75ft³)2.45m (8')1.30m (4'3")1.20m (3'9")700Hardox10£6,640


All of the forks in our range come with a tube style back for maximum strength and visibility. For another type of fork back to suit your application, please add one of the below part numbers to your enquiry with your Dealer.

Part NumberDescriptionRRP
CM1Middle section plated to protect machine's headstockNo Extra Cost
CM2Whole fork back platedNo Extra Cost
CM4Whole fork back plated with 'Cherry' cut out and visibility slotsNo Extra Cost
DST01Double Side Tines£40
CT13Check Valve£155


Tine Options, to suit your application, we offer a choice of KV Style, Hardox or 2’’ round base tines and KV Style or Hardox Grab tines. All KV Style tines are bushed in the frame.
Pins, 38mm Ø high grade with retaining bolt. Used throughout all of our HD Fork & Grab ranges and HD Waste Buckets
Fork Back, as standard built with ‘tube style’ for maximum strength and visibility. However, we can build with the middle plated or the whole fork back plated.
Grab Stops, are fitted for the opening and closing of the grab to protect the hydraulic cylinders and pins.
Hydraulic Cylinders, inward facing ports and plated in for protection. High capacity.
Wide Opening Grab, 1520mm vertical height.
Wear Pads, three across the base of the fork for protection of the tine holder


Part NumberDescriptionRRP
CF07P0138mm Ø Pivot Pin 195mm Long£50
CF07P0238mm Ø Top Ram Pin 145mm Long£40
CF07P0338mm Ø Bottom Ram Pin 195mm Long£40
CT06/1680mm Long, Curved KV Type Grab Tine W/ M20 Nut£65
CT06/1/HD680mm Long, Curved Profiled Tine£60
CT06810mm Long, Curved KV Type Tine£70
CT03/21100mm Long, Straight KV Type Tine£95
CT02/HD980mm Long, Straight Hardox Tine 50mm Thick£140
CT02/HD/5980mm Long, Straight Hardox Tine 40mm Thick£115
CT01/1980mm Long, Straight 50mm Ø Round Tine W/ M28 Nut£80
CP02Hydraulic Cylinder£345
CT13Check Valve£155
CT08/CF06Replacement Top Grab£2,785




Related Products